Toolholders with HSK-tapers shank ISO 12164-3 |
 |
| HSK-T multi-turning-toolholders with internal coolant - for clamping holders with coolant channels directly to the cutting edge - for ISO-clamping holders with claw clamping for best possible coolant supply - coolant pressure up to 100 bar Delivery without tool 
|
| HSK - T 40 | ||||||||
| Art.-Nr. | Type | D | A | X | h | h1 | b | l |
| 40.11.10.043 | HSK-T 40x10x 70 | 40 | 70 | 10 | 55 | 27.5 | 10 | - |
| Coolant supply only with coolant nozzle | ||||||||
| HSK - T 63 | ||||||||
| 63.11.20.043 | HSK-T 63x20x112 | 63 | 112 | 20 | 80 | 40 | 31.5 | 10 |
| 63.11.25.043 | HSK-T 63x25x112 | 63 | 112 | 25 | 90 | 45 | 31.5 | 10 |
| HSK - T 100 | ||||||||
| 100.11.25.043 | HSK-T100x25x125 | 100 | 125 | 25 | 90 | 45 | 31.5 | - |
| HSK-T multi-turning-toolholders 90°with internal coolant - for clamping holders with coolant channels directly to the cutting edge - for ISO-clamping holders with claw clamping for best possible coolant supply - coolant pressure up to 100 bar Delivery without tool
|
| HSK - T 63 | ||||||||
| Art.-Nr. | Type | D | A | X | h | h1 | b | l |
| 63.11.20.046 | HSK-T 63x20x90° | 63 | 85 | 20 | 80 | 40 | 35 | 70 |
| 63.11.25.046 | HSK-T 63x25x90° | 63 | 85 | 25 | 90 | 45 | 35 | 70 |
| HSK - T 100 | ||||||||
| 100.11.25.046 | HSK-T100x25x90° | 100 | 125 | 25 | 90 | 45 | 40 | 60 |
| HSK-T multi-turning-toolholders 45°with internal coolant - for clamping holders with coolant channels directly to the cutting edge - for ISO-clamping holders with claw clamping for best possible coolant supply - coolant pressure up to 100 bar Delivery without tool
|
| HSK - T 63 | ||||||
| Art.-Nr. | Type | D | A | X | h | h1 |
| 63.11.20.045 | HSK-T 63x20x45° | 63 | 93 | 20 | 80 | 40 |
| 63.11.25.045 | HSK-T 63x25x45° | 63 | 97 | 25 | 90 | 45 |
| HSK - T 100 | ||||||
| 100.11.25.045 | HSK-T100x25x45° | 100 | 128 | 25 | 88 | 44 |
 |
|
 |